السیدی 4.3 اینچ با تاچ 4.3inch TFT LCD display MCU +RST touch - 480x272 - SPI / Pararllel

السیدی 4.3 اینچ با تاچ 4.3inch TFT LCD display MCU +RST touch - 480x272 -SPI / Pararllel

این السیدی قابلیت راه اندازی با تمامی میکروکنترلر ها دارد و درایور السیدی ST6201 می باشد و مثال همراه آن با stm32f1x نوشته شده است.

- 17:24: DB0-DB7, MCU pins connected to 8 bits, high-speed SPI interface
- 25:32: DB8-DB15, MCU pins connected to 8 bits
- 33: LED-A, LED-K, MCU pins connected to LED display, current limit: 3.0-3.3V, maximum: 3.1V
- 34-36: IM0, IM1, IM2, MCU pins connected to 3-bit configuration
- 37: MCU pins connected to 16-bit configuration
- 38: MCU pins connected to 1-bit configuration
- 39: MCU pins connected to SPI
- 40: SPI4W, SPI4W="1": 4-bit SPI, SPI4W="0": 3-bit SPI

- 1: CTP-RST, touch panel reset pin, connected to RC circuit IO
- 2: CTP-VCC, touch panel power supply VCC (2.8-3.3V)
- 3: CTP-GND, touch panel ground
- 4: CTP-INT, touch panel interrupt pin
- 5: CTP-SDA, touch panel I2C-SDA
- 6: CTP-SCL, touch panel I2C-SCL

- 1: XL/X-, touch panel X-left or X-negative input
- 2: YU/Y+, touch panel Y-up or Y-positive input
- 3: XR/X+, touch panel X-right or X-positive input
- 4: YD/Y+, touch panel Y-down or Y-positive input
- 5: GND, ground
- 6: VDDI, internal power supply, 1.8-3.3V
- 7: VDDA, analog power supply, 2.8-3.3V
- 8: TE, touch detection pin, active low
- 9: CSX, MCU chip select pin / MCU-16 mode select / 3-wire SPI / 4-wire SPI / touch panel control, active low
- 10: DCX, MCU data/command select pin, active low
- 11: WRX, MCU write pin / 4-wire SPI / 8-wire SPI / touch panel control
- 12: RDX, MCU read pin / MCU-16 mode select, active low
- 13: SDA, 3-wire SPI / 4-wire SPI / touch panel data line
- 14: NC, no connection
- 15: RESET, reset pin, active low
- 16: GND, ground